24 Clevis Hanger
PIPE HANGERS & SUPPORTS (Clevis Hangers)
|
|
|
Recommended for the suspension of stationary non-insulated or insulated (with shield) pipe lines from 1/2" through 36", allowing for vertical adjustment.
- Materials:
- Carbon Steel, Stainless Steel 304SS & 316SS
- Approvals:
- Complies with MSS SP-58 and SP-69 (Type 1).
cULus Approved (2 1/2" through 8"- Bare, Zinc, & S/S)
FM Approved (3/4" -2" Zinc, 2 1/2' through 8" - Bare and Zinc)
- Notes:
- Maximum temperatures for Bare Metal 650
- Looking for Shields to use with the Clevis Hangers? Click here!
Product Sheet
315.31KB
Finishes
Zinc Plated (Z)
Hot Dipped Galvanized (HDG)
Black Epoxy
Bare Metal
Stainless Steel (316SS)
Stainless Steel (304SS)
Product Sheet
315.31KB
Finishes
Zinc Plated (Z)
Hot Dipped Galvanized (HDG)
Black Epoxy
Bare Metal
Stainless Steel (316SS)
Stainless Steel (304SS)
Product Sheet
315.31KB
| Iron Pipe Size In. (mm) |
Material/Finish | Standard Box Quantity | Quantity Required (each) |
Add to Quote |
|---|---|---|---|---|
| 1/2 (12) | 1 | Add | ||
| 3/4 (19) | 1 | Add | ||
| 1 (25) | 1 | Add | ||
| 1 1/4 (31) | 1 | Add | ||
| 1 1/2 (38) | 1 | Add | ||
| 2 (50) | 1 | Add | ||
| 2 1/2 (63) | 1 | Add | ||
| 3 (80) | 1 | Add | ||
| 3 1/2 (90) | 1 | Add | ||
| 4 (100) | 1 | Add | ||
| 5 (125) | 1 | Add | ||
| 6 (150) | 1 | Add | ||
| 8 (200) | 1 | Add | ||
| 10 (250) | 1 | Add | ||
| 12 (300) | 1 | Add | ||
| 14 (350) | 1 | Add | ||
| 15 (380) | 1 | Add | ||
| 16 (400) | 1 | Add | ||
| 18* (450) | 1 | Add | ||
| 20* (500) | 1 | Add | ||
| 24* (600) | 1 | Add | ||
| 30* (750) | 1 | Add | ||
| 36 (900) | 1 | Add |
* fitted with pipe spacer on cross bolt.
Oversized Clevis Hanger Installation Note:
A pipe spacer should be placed over the clevis bolt and blocks need to be placed on either side of the pipe until final installation is completed. Additionally, all clevis hangers on the line need to take up their share of the pipe load prior to insulating to prevent hanger damage by overloading.